Electrical and home electrification

An apples-to-apples electrical service or panel proposal checklist for load calculation, utility requirements, service rating, meter and mast work, panel type and location, feeder and grounding scope, surge and protective devices, circuits and directory, patching, permits, outage planning, future EV or heat-pump capacity, warranties, and payment terms before contractor selection.

A pre-energization electrical service and panel checklist for approved equipment, service conductors and raceways, meter and disconnect, panel mounting and clearances, feeders, neutral and grounding separation, grounding electrode and bonding, breaker compatibility, conductor protection, labeling, unused openings, surge and protective devices, utility release, permits, and photographic evidence before power is restored.

A post-energization circuit-identification checklist for clear panel directories, room and appliance labeling, multiwire and shared circuits, disconnects, subpanels, spare and abandoned breakers, life-safety equipment, critical loads, EV and HVAC circuits, owner shutoff knowledge, and retained one-line or circuit records after panel or service work.

A pre-use residential EV charging checklist for charger and vehicle compatibility, circuit and load calculation, dedicated branch circuit or approved load management, breaker and conductor sizing, disconnect where required, mounting, cable reach and trip hazards, garage and outdoor exposure, GFCI or protective functions, network and utility settings, permit inspection, commissioning, incentives, account transfer, and owner emergency procedures.

A residential standby or portable-generator connection checklist for approved generator type and location, fuel and exhaust safety, inlet or transfer equipment, neutral and grounding configuration, interlocks, load selection and shedding, service rating, permits, utility coordination, startup, simulated outage, transfer and retransfer, alarms, carbon-monoxide precautions, maintenance, and owner handover before final acceptance.

A pre-panel residential solar checklist for roof age and condition, structural and layout approval, attachment type and spacing, rafter or approved substrate engagement, roof-covering compatibility, flashing and seal details, underlayment integration, corrosion compatibility, conduit and wire routes, setbacks and access paths, attic evidence, water-management photographs, and coordination with roof warranties before modules hide the attachments.

A solar closeout checklist for installed modules and inverter models, DC and AC wiring, rapid shutdown and disconnects, grounding and bonding, labels, monitoring, production test, battery or generator interactions, permit final, utility interconnection and permission to operate, net-metering account, warranties, installer and financier access, cybersecurity, roof documentation, and owner emergency procedures before final payment.

A pre-commissioning residential battery checklist for approved chemistry and capacity, indoor or outdoor location, fire and structural requirements, environmental and impact protection, working clearances, service and ventilation needs, conductors and disconnects, grounding, overcurrent and rapid-shutdown interactions, backup-load panel, solar and generator coordination, communications, internet and cybersecurity, utility approval, emergency labels, commissioning plan, warranty, and owner handover.