Condición y planitud del subpiso
Punto críticoCómo verificar
1. Check flatness with a 10-foot straightedge — maximum 3/16" deviation for most finish flooring
2. Walk the entire subfloor — feel for soft spots, squeaks, or bouncing
3. Check moisture content with a moisture meter — should be below manufacturer specs for finish flooring
4. Verify subfloor is properly fastened — screws preferred over nails (less squeaking)
5. Check for gaps between plywood panels (should be 1/8" expansion gap)
6. Verify panel edges are supported on joists (no unsupported edges)
7. Check for any damaged, delaminated, or water-stained panels
8. Verify subfloor type is compatible with intended finish flooring
Problemas frecuentes
- Subfloor not flat (finish flooring telegraphs imperfections)
- Squeaky subfloor (needs re-fastening before finish flooring)
- High moisture content (damages finish flooring)
- Unsupported panel edges (flex creates bumps in finish floor)
- Damaged or delaminated panels (soft spots)
- Wrong subfloor type for finish flooring (e.g., particle board under hardwood)