Building Envelope & Weatherproofing

Checklists for inspecting waterproofing and damp-proofing systems in accordance with EN 13967, EN 13969, EN 14967, UNI 11470, UNI 8178 and NTC 2018.

Checklist for inspecting exterior cladding and facade systems per ETAG 034, EN 13830, and related EN standards for wind loading, fire performance, and weatherproofing.

Checklists for inspecting window and door installations including thermal performance, air and water tightness, glazing and sealing in accordance with EN 14351-1, UNI 11673, D.M. 26/06/2015 and Italian energy regulations.

Checklists for inspecting pitched and flat roofing systems including structure, waterproofing, insulation and drainage in accordance with NTC 2018, UNI 11470, EN 13707 and Italian building regulations.

Checklist for stucco and EIFS installation: substrate, mesh, thickness, cracks, and moisture management.

Checklist for stone veneer: substrate, mortar, weep holes, flashing, and structural support.

Checklist for vinyl siding: installation quality, J-channel, flashing, and moisture management.

Checklist for metal roofing: panel alignment, fasteners, flashing, underlayment, and transitions.

Checklist for flat roof: membrane condition, drainage, flashing, penetrations, and ponding.

Checklist for skylight installation: flashing, condensation, shaft, and weather seal.

Checklist for gutters and downspouts: slope, fastening, leaks, downspout extensions, and capacity.

Checklist for balcony and terrace: waterproofing, drainage, structural, railing, and surface condition.

Checklist for exterior insulation systems: board attachment, mesh embedding, render quality, and detailing.