Structural Design and Inspection

Checklist for inspecting reinforced concrete structures in accordance with EN 1992 (Eurocode 2), execution standard EN 13670 and DTU 21 (Execution of concrete works).

Checklist for inspecting steel structures in accordance with EN 1993 (Eurocode 3), execution standard EN 1090 and DTU 32.1 (Steel construction: Steel framework).

Checklist for inspecting masonry structures in accordance with EN 1996 (Eurocode 6), execution standard EN 1996-2 and DTU 20.1 (Small-element masonry — walls and partitions).

Checklist for inspecting timber structures in accordance with EN 1995 (Eurocode 5), related execution standards, and DTU 31.1 (Timber framework) and DTU 31.2 (Timber-frame buildings).

Checklist for rebar and reinforcement: bar size, spacing, cover, lap splices, chairs, and tie wire.

Checklist for formwork: alignment, bracing, dimensions, cleanliness, and release agent.

Checklist for inspecting scaffolding and temporary works per EN 12810, EN 12811, EN 12812, and EN 12813 series standards.

Checklist for inspecting garage and parking structures per EN 1992-1-1, EN 1504, and related EN standards for structural integrity, durability, fire protection, and ventilation.

Checklist for pile foundation: driving records, alignment, capacity, cutoff level, and pile cap.

Checklist for slab-on-grade: subgrade, vapor barrier, reinforcement, thickness, and curing.

Checklist for crawl space: moisture control, ventilation, insulation, structural elements, and pest prevention.

Checklist for retaining wall: drainage, structural integrity, lean, cracks, and surcharge loading.

Checklist for basement wall construction: waterproofing, reinforcement, drainage, and wall type verification.

Checklist for structural connections: bolts, welds, hangers, hold-downs, and hardware.