Finishing Works and Fit-Out

Checklist for inspecting drywall and plasterboard installations in accordance with DTU 25.41 (plasterboard partition and lining works) and NF EN 520 (plasterboard product standard).

Checklist for inspecting ceramic and stone tiling installations in accordance with DTU 52.2 (bonded floor and wall tiling), NF EN 14411 (ceramic tile product standard), and the French Classement UPEC system.

Checklist for inspecting floor covering installations per EN product standards and performance classifications.

Checklist for inspecting painting and decorative coating works in accordance with DTU 59.1 (interior and exterior painting) and NF EN 13300 (paint classification for interior surfaces).

Checklist for interior doors: operation, fit, hardware, and finish quality.

Checklist for trim and molding: joints, caulking, nail holes, and overall finish quality.

Checklist for ceiling installation: drywall, suspended ceilings, texture, and finish quality.

Checklist for cabinet installation: level, plumb, attachment, door alignment, and hardware.

Checklist for countertop installation: level, seams, backsplash, sink cutout, and overhang support.

Checklist for hardwood flooring: subfloor, installation, finish, gaps, and moisture.

Checklist for laminate and vinyl flooring: subfloor prep, click-lock engagement, transitions, and expansion gaps.

Checklist for carpet installation: seams, stretching, pad, transitions, and pattern matching.

Checklist for wallpaper: pattern matching, seams, adhesion, bubbles, and trim cuts.

Checklist for stairs and railings: dimensions, consistency, handrails, balusters, and safety.

Checklist for subfloor: flatness, moisture, fastening, squeaks, and preparation for finish flooring.