Checklist for Ice Dam Prevention Inspection per applicable building codes and industry standards.
6 items to check
These checklists are in development and testing. Information is for reference only and does not replace professional consultation. Data may contain inaccuracies. Consult a qualified professional.
If you notice an error, please email [email protected].
For a complete inspection, also consider:
Per IECC (International Energy Conservation Code), attic insulation must meet local R-value requirements (R-38 to R-60 depending on climate zone). Uniform coverage is critical — even small gaps allow heat loss that melts snow and creates ice dams. Insulation must not block soffit vents. No gaps around penetrations (lights, pipes, ducts).
Per IECC and Energy Star guidelines, air sealing is the single most effective ice dam prevention measure. Warm air rising through ceiling penetrations melts snow on the roof. All penetrations through the ceiling plane must be sealed: recessed lights, plumbing vents, electrical boxes, attic hatches, ductwork connections, chimney chases, and top plates of interior walls.
Per applicable building codes and industry standards, Ventilation must meet quality and safety requirements. Follow manufacturer specifications and local code amendments for specific requirements.
Per applicable building codes and industry standards, Ice must meet quality and safety requirements. Follow manufacturer specifications and local code amendments for specific requirements.
Per applicable building codes and industry standards, Heat must meet quality and safety requirements. Follow manufacturer specifications and local code amendments for specific requirements.
Per applicable building codes and industry standards, Gutter must meet quality and safety requirements. Follow manufacturer specifications and local code amendments for specific requirements.
Checklist for Ice Dam Prevention Inspection per applicable building codes and industry standards.
Checklist for inspecting waterproofing and moisture protection systems in accordance with DIN 18533 (below-grade), DIN 18534 (interior wet rooms), DIN 18531 (flat roofs) and EN 14967.
Checklist for inspecting exterior cladding and facade systems per ETAG 034, EN 13830, and related EN standards for wind loading, fire performance, and weatherproofing.
Checklist for inspecting pitched and flat roofing systems per EN product standards, DIN 68800 for timber protection, and Eurocode load requirements as implemented through German national annexes.