Inspection Pose Papier Peint

Seams should be tight and invisible. Pattern must match at every seam. No bubbles, wrinkles, or loose edges.

1. Check every seam — should be tight with no visible gap or overlap

2. Verify pattern matches at every seam (horizontal pattern alignment)

3. Look for bubbles or blisters (press gently — indicates poor adhesion)

4. Check corners — should be wrapped smoothly, not torn or wrinkled

5. Inspect trim cuts at ceiling, baseboard, and around outlets — clean, straight cuts

6. Check around windows and doors — paper should be tight with clean cuts

7. Verify no adhesive residue on wallpaper surface

8. Check that outlet and switch plates cover paper edges cleanly

- Visible seams (most common wallpaper complaint)

- Pattern mismatch at seams

- Bubbles or blisters (adhesion failure)

- Wrinkled corners (technique issue)

- Ragged cuts at trim edges

- Adhesive residue on surface (not properly cleaned)

- Lifting edges (insufficient adhesive at seams)