Finishing & Fit-out Works

Checklist for inspecting gypsum board (drywall) installation per CSA A82.31 (Gypsum Board Products), NBC Part 9, and GA-216 (Gypsum Board Application) standards.

Checklist for inspecting ceramic, porcelain, and natural stone tile installations per CSA A137.1 (Ceramic Tile) and TCNA (Tile Council of North America) Handbook standards.

Checklist for inspecting flooring installation quality per NBC, CSA standards, and industry best practices for hardwood, laminate, tile, and resilient flooring in Canadian construction.

Checklist for inspecting painting and protective coatings per CGSB 1-GP standards (Canadian General Standards Board), MPI (Master Painters Institute) specifications, and industry best practices for Canadian construction.

Checklist for interior doors: operation, fit, hardware, and finish quality.

Checklist for trim and molding: joints, caulking, nail holes, and overall finish quality.

Checklist for ceiling installation: drywall, suspended ceilings, texture, and finish quality.

Checklist for cabinet installation: level, plumb, attachment, door alignment, and hardware.

Checklist for countertop installation: level, seams, backsplash, sink cutout, and overhang support.

Checklist for hardwood flooring: subfloor, installation, finish, gaps, and moisture.

Checklist for laminate and vinyl flooring: subfloor prep, click-lock engagement, transitions, and expansion gaps.

Checklist for carpet installation: seams, stretching, pad, transitions, and pattern matching.

Checklist for wallpaper: pattern matching, seams, adhesion, bubbles, and trim cuts.

Checklist for stairs and railings: dimensions, consistency, handrails, balusters, and safety.

Checklist for subfloor: flatness, moisture, fastening, squeaks, and preparation for finish flooring.